{"title":"Evaporator Units","description":"\u003cp\u003eThere are two types of evaporator units In-dash and Under-dash. For information on how to select an evaporator see the \u003ca href=\"https:\/\/nostalgicac.com\/help_selecting_a_kit\"\u003ehelp page\u003c\/a\u003e. Nostalgic AC carries a full line of evaporators. We also manufacture evaporators. If you need an evaporator for a special application please let us know.\u003c\/p\u003e\n\u003ch3\u003eNostalgic AC manufactures evaporators in Ocala Florida.\u003c\/h3\u003e\n\u003cp\u003eAn evaporator is where the magic of a\/c happens.  The evaporator has refrigerant flow through its internals while a blower motor blows air through its external fins.  This is the cold air you feel blowing out of the vents.   Being the evaporator is the central spot for cold air magic there is no excuse for Nostalgic AC not to manufacture this part.\u003c\/p\u003e\n\u003cp\u003eThere are two types of evaporators for aftermarket air conditioning systems; indash and underdash.  Underdash units are sometimes referred to as: Knee knockers, hang ons, and hang downs.  Both types of units are available with a\/c only, heat and air, and some have defrost and floor provisions.\u003c\/p\u003e\n\u003cp\u003eUnder dash evaporator units are the easiest and least expensive to install into a vehicle.  The under dash unit will not work in vehicles that have manual transmissions, or consoles, unless it is mounted under the passenger glove box and air is ducted over to the driver side.  The under dash unit is normally sold as an a\/c only product but we do offer the units with heat, and some with defrost.  Since we make these units in house we can customize some units to fit specific needs.   Almost all of the under dash units we sell have the controls and vents mounted in the evaporator housing.  We do make a few evaporator units with remote vents and controls. \u003c\/p\u003e\n\u003cp\u003eIn dash evaporator units are installed behind the dashboard and are almost always out of sight.  The in dash units are designed to hide the majority of the duct hose, and hoses behind the dash with a very small portion of the bottom of the unit visible; similar to that of a new car.  Speaking of new cars most in dash units operate different then a new car's a\/c.  The evaporators we sell have the heater and evaporator made all into one unit; newer cars separate the evaporator and heater core with blend doors.  Some of the aftermarket a\/c manufactures choose the blend door design but we do not feel it is necessary to spend the extra expense to achieve the same temperature out of the vents.  In dash evaporators require the controls and the vents to be mounted under or in the dash.  We do offer a service to convert the original controls if you wish to make the inside of the vehicle look stock.  You can mail us your control panel and we will retrofit it to control our a\/c systems.  As for the vents and controls we let our customers choose the styles, just let us know what items you prefer and they will arrive with your order.\u003c\/p\u003e\n\u003cp\u003eRoof mount and floor evaporators are another option for buses, tractors, big trucks, and other machinery.  These units are very similar to the under dash evaporator units.  They function in the same way but offer much more cooling volume.  These units can be made in 12 or 24 volt and will meet the demand of any hot humid day.\u003c\/p\u003e\n\u003cp\u003eEvaporator units are our business: they are the main product we manufacture.  Every evaporator is made by our staff and tested on our benches.  We are very knowledgeable in the evaporator genre of aftermarket air conditioning and will be happy to speak with customers about manufacturing evaporators to meet their needs.\u003c\/p\u003e","products":[{"product_id":"ud-550-overhead-roof-mount-evaporator-unit","title":"UD-550 Overhead Roof Mount Evaporator Unit","description":"\u003cp\u003eA\/C only evaporator unit for Vans, Trucks, and Buses designed to mount on the roof (inside). The evaporator has five rectangle louvers. The controls can be located remotely. The evaporator has 2 Double Shaft 3-Speed Blower Motors with a quad fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 510 CFM and 22,700 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit includes: Three speed blower motor Adjustable temperature thermostat Evaporator unit mounting hardware Expansion valve 9ft Drain tube \u0026amp; cork tape for hose fittings O-rings The evaporator unit measures: 27\" wide x 12\" deep x 6\" tall. This Evaporator does not have vents for floor heat. If you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003c\/p\u003e\u003cp\u003eA\/C only evaporator unit for Vans, Trucks, and Buses designed to mount on the roof (inside). The evaporator has five rectangle louvers. The controls can be located remotely. The evaporator has 2 Double Shaft 3-Speed Blower Motors with a quad fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 510 CFM and 22,700 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003e9ft Drain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eThe evaporator unit measures: 27\" wide x 12\" deep x 6\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938101629215,"sku":"UD550","price":305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud550_1_1.jpg?v=1753725594"},{"product_id":"ud-560-overhead-roof-mount-evaporator-unit","title":"UD-560 Overhead Roof Mount Evaporator Unit","description":"\u003cp\u003eA\/C only evaporator unit designed to mount on the roof (inside). The evaporator has six rectangle louvers with chrome trim. The controls can be located remotely. The evaporator has 2 Double Shaft 3-Speed Blower Motors with a quad fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 610 CFM and 32,200 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003e2 Double Shaft 3-Speed Blower Motors\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003e9ft Drain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eThe evaporator unit measures: 32\" wide x 13\" deep x 7\" tall\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938101924127,"sku":"UD-560","price":361.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud560.jpg?v=1753725592"},{"product_id":"ud-520-12v-big-truck-floor-mount-evaporator-unit","title":"UD-520 12V Big Truck Floor Mount Evaporator Unit","description":"\u003cp\u003e12V Floor Mount A\/C only evaporator with four round vents surrounded by Steel case for durability. Designed to sit between the seats, or the floor in the rear of a vehicle. The evaporator has four round louvers that can be pointed in all directions or closed off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator has approximately 260 CFM and 17,180 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003e\u003cbr\u003eThe evaporator unit measures: 12.8\" wide x 8.3\" deep x 20\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A.\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"With Floor Mounting Hardware","offer_id":50938101989663,"sku":"UD-520-01","price":834.99,"currency_code":"USD","in_stock":true},{"title":"No Floor Mounting Hardware","offer_id":50938102022431,"sku":"UD-520-02","price":734.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud520_1.jpg?v=1753725591"},{"product_id":"ud-190-1964-1967-ford-mustang-falcon-evaporator-unit","title":"UD-190 1964 - 1967 Ford Mustang Falcon Evaporator Unit","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e1964-1967 Ford Falcon Mustang replica with Black Face. Under-Dash unit replicates the original evaporator in old Fords. This Unit has a Black Face and comes with Dual Vane Chrome Vents. If you prefer a different look, please check the pictures to find one that you would like and choose from the options below. Unit is ready to install with your existing system or can be added with a new system. The evaporator outputs 290 CFM and 15000 BTU of AC. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e1964-1967 Ford Falcon Mustang replica. Underdash unit replicates the original evaporator in old Fords. Unit is ready to install with your existing system or can be added with a new system.\u003cbr\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has four round chrome louvers. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Dual Vane Vents Black Face (Default) \/ Yes","offer_id":50938102776095,"sku":"UD-190-01","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Black Face (Default) \/ No","offer_id":50938102808863,"sku":"UD-190-02","price":317.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Black Face \/ Yes","offer_id":50938102841631,"sku":"UD-190-03","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Black Face \/ No","offer_id":50938102874399,"sku":"UD-190-04","price":317.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Black Face \/ Yes","offer_id":50938102907167,"sku":"UD-190-05","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Black Face \/ No","offer_id":50938102939935,"sku":"UD-190-06","price":317.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Stainless Face \/ Yes","offer_id":50938102972703,"sku":"UD-190-07","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Stainless Face \/ No","offer_id":50938103005471,"sku":"UD-190-08","price":342.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Stainless Face \/ Yes","offer_id":50938103038239,"sku":"UD-190-09","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Stainless Face \/ No","offer_id":50938103071007,"sku":"UD-190-10","price":342.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Stainless Face \/ Yes","offer_id":50938103103775,"sku":"UD-190-11","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Stainless Face \/ No","offer_id":50938103136543,"sku":"UD-190-12","price":342.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud1902.jpg?v=1753725586"},{"product_id":"ud-180-under-dash-slimline-air-heat-defrost-unit","title":"UD-180 Under-Dash Slimline Air Heat \u0026 Defrost Unit","description":"\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103202079,"sku":"UD-180","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud180_5.jpg?v=1753725585"},{"product_id":"ud-175-slimline-heat-air-under-dash-evaporator","title":"UD-175 Slimline Heat Air Under-Dash Evaporator","description":"\u003cp\u003eA\/C and heat evaporator unit designed to mount under the dash board. The evaporator has four rectangle louvers. The controls are located in the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side A\/C hose outlets, the fittings for the A\/C hoses will be on the passenger side of the unit when it is installed. The heater hoses will be on the driver side of the unit. The evaporator has approximately 290 CFM and 14000 BTU A\/C \u0026amp; 12000 BTU heat. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 26\" wide x 12\" deep x 5\" tall.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eCable operated heater valve with cable\u003cbr\u003eFour rubber grommets\u003c\/p\u003e\n\u003cp\u003e\\\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103300383,"sku":"UD-175","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud170_3.jpg?v=1753725584"},{"product_id":"ud-170-slimline-under-dash-evaporator","title":"UD-170 Slimline Under-Dash Evaporator","description":"\u003cp\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has four rectangle louvers. The controls are located in the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 26\" wide x 12\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103365919,"sku":"UD-170","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud170_1.jpg?v=1753725584"},{"product_id":"ud-160-under-dash-evaporator-unit-remote-vent","title":"UD-160 Under-dash Evaporator Unit Remote Vent","description":"\u003cp\u003eUnder-dash unit that comes with remote controls and a vent to mount on the driver side. A\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers, and a rectangle Under-Dash vent that will mount under the driver side of the vehicle. The controls can be mounted anywhere in or under the dashboard.. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 18\" wide x 12\" deep x 5\" tall x 16\" wide at back of unit. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003eUnder-dash unit that comes with remote controls and a vent to mount on the driver side. A\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers, and a rectangle underdash vent that will mount under the driver side of the vehicle. The controls can be mounted anywhere in or under the dashboard.. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eRectangle underdash vent, duct hose\u003cbr\u003eControls in an underdash control pod\u003cbr\u003eTwo rubber grommets\u003cbr\u003eThe evaporator unit measures: 18\" wide x 12\" deep x 5\" tall x 16\" wide at back of unit. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103431455,"sku":"UD-160","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud160_1.jpg?v=1753725583"},{"product_id":"ud-150-under-dash-evaporator-1967-1972-ford-truck","title":"UD-150 Under-dash Evaporator 1967 - 1972 Ford Truck","description":"\u003cp\u003eSlimline Under-dash evaporator unit for 1967-1972 Ford trucks. It sits under the dash from the passenger side and comes with an extension that goes around the steering column to the driver side. This is an A\/C only evaporator unit designed to mount under the dash board. The evaporator has four rectangle louvers. The controls are located near the driver side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 16000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit measures: 54\" wide x 12\" deep x 8\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A. by Nostalgic AC Parts.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103496991,"sku":"UD-150","price":520.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud150_4.jpg?v=1753725582"},{"product_id":"ud-140-under-dash-evaporator-unit-1967-1972-chevy","title":"UD-140 Under-dash Evaporator Unit 1967-1972 Chevy","description":"\u003cp\u003e1967 - 1972 Chevy Trucks. This slimline unit sits under the dashboard from the passenger side to the steering column.\u003cbr\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has four rectangle louvers. The controls are located near driver side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator outputs 290 CFM and 15000 BTU of AC. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 42\" wide x 12\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv data-element=\"main\" data-content-type=\"html\" data-appearance=\"default\"\u003e\n\u003cp\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts, in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103562527,"sku":"UD-140","price":525.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud140_3.jpg?v=1753725581"},{"product_id":"ud-130-heat-air-chrome-face-underdash-evaporator","title":"UD-130 Heat Air Chrome Face Underdash Evaporator","description":"\u003cp\u003e\u003cstrong\u003eVery limited Supply!! \u003c\/strong\u003eA\/C and heat evaporator unit designed to mount under the dash board. The evaporator has three large chrome rectangle louvers; the face is chrome. There are two small round louvers located on the side of the unit to provide floor air or heat. The controls are located on the left side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side A\/C hose outlets and driver side heater outlets, the fittings for the A\/C hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU A\/C and 12000 BTU heat. The evaporator unit measures: 17\" wide x 12\" deep x 6\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e\u003cstrong\u003eVery limited Supply!! \u003c\/strong\u003eA\/C and heat evaporator unit designed to mount under the dash board. The evaporator has three large chrome rectangle louvers; the face is chrome. There are two small round louvers located on the side of the unit to provide floor air or heat. The controls are located on the left side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side A\/C hose outlets and driver side heater outlets, the fittings for the A\/C hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU A\/C and 12000 BTU heat . The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eCable operated heater control with a cable\u003cbr\u003eFour rubber grommets\u003cbr\u003eThe evaporator unit measures: 17\" wide x 12\" deep x 6\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A. by Nostalgic AC Parts.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103660831,"sku":"UD-130","price":346.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud120_1.jpg?v=1753725579"},{"product_id":"ud-120-under-dash-evaporator-unit-chrome-face","title":"UD-120 Under-dash Evaporator Unit Chrome Face","description":"\u003cp\u003e\u003cstrong\u003eVery limited Supply!!\u003c\/strong\u003e A\/C only evaporator unit designed to mount under the dash board. The evaporator has three chrome rectangle louvers in the center of the unit; the face is chrome also. There are two small round louvers on the sides to provide floor air. The controls are located on the left side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 17\" wide x 12\" deep x 6\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e\u003cstrong\u003eVery limited Supply!! \u003c\/strong\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has three chrome rectangle louvers in the center of the unit; the face is chrome also. There are two small round louvers on the sides to provide floor air. The controls are located on the left side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eThe evaporator unit measures: 17\" wide x 12\" deep x 6\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A. by Nostalgic AC Parts.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103759135,"sku":"UD-120","price":277.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud120.jpg?v=1753725578"},{"product_id":"ud-110-under-dash-a-c-only-evaporator-unit","title":"UD-110 Under-Dash A\/C Only Evaporator Unit","description":"\u003cp\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit. The controls are located on the driver side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. \u003cspan style=\"font-size: small;\"\u003eThe evaporator outputs 290 CFM and 15000 BTU of AC.\u003c\/span\u003e The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 10\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003eThe evaporator outputs 290 CFM and 15000 BTU of AC.\u003c\/span\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit. The controls are located on the driver side of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. \u003cspan style=\"font-size: small;\"\u003eThe evaporator outputs 290 CFM and 15000 BTU of AC.\u003c\/span\u003e The evaporator unit is compatible with R-134a and R-12 refrigerants. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938103824671,"sku":"UD-110","price":277.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud110_2.jpg?v=1753725577"},{"product_id":"ud-105hc-under-dash-heat-and-air-evaporator-unit","title":"UD-105HC Under-Dash Heat and Air Evaporator Unit","description":"\u003cp\u003e\u003cspan style=\"font-size: medium;\"\u003eA\/C and heat evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit and two round louvers on 45 degree angles facing the driver and passenger. The louvers can be turned in all directions or shut off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets for the air conditioning, the fittings for the hoses will be on the passenger side of the unit when it is installed. The heater hoses will be on the driver side when the unit is installed. The evaporator has approximately 290 CFM, 14000 BTU A\/C \u0026amp; 12000 BTU heat. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eA\/C and heat evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit and two round louvers on 45 degree angles facing the driver and passenger. The louvers can be turned in all directions or shut off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets for the air conditioning, the fittings for the hoses will be on the passenger side of the unit when it is installed. The heater hoses will be on the driver side when the unit is installed. The evaporator has approximately 290 CFM, 14000 BTU A\/C \u0026amp; 12000 BTU heat. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eCable operated heater control vavle with cable\u003cbr\u003eFour rubber grommets\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104185119,"sku":"UD-105HC","price":346.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud105.jpg?v=1753725576"},{"product_id":"ud-105-under-dash-air-only-evaporator-unit","title":"UD-105 Under-dash Air Only Evaporator Unit","description":"\u003cp\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit and two round louvers on 45 degree angles facing the driver and passenger. The louvers can be turned in all directions or shut off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003eA\/C only evaporator unit designed to mount under the dash board. The evaporator has two rectangle louvers in the center of the unit and two round louvers on 45 degree angles facing the driver and passenger. The louvers can be turned in all directions or shut off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104283423,"sku":"UD-105","price":277.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud105_1.jpg?v=1753725575"},{"product_id":"id-265-compact-heat-air-evaporator-unit","title":"ID-265 Compact Heat \u0026 Air Evaporator Unit","description":"\u003cspan style=\"font-size: small\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104676639,"sku":"ID265","price":494.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-in-dash-evaporator-id265_e622ec58-f559-43ea-be08-def32fc3b53e.jpg?v=1783427853"},{"product_id":"id-260-heat-air-defrost-indash-unit","title":"ID-260 Heat Air Defrost Indash Unit","description":"\u003cp\u003eA\/C, heat, and defrost evaporator unit designed to mount behind the dash board. The evaporator has three 2.5\" oval duct hose adapters for the vents, and two 2\" defrost outlets. The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables. This unit is setup to use cable controls, if you need vacuum please contact us.\u003c\/p\u003e\n\u003cp\u003eA\/C, heat, and defrost evaporator unit designed to mount behind the dash board. The evaporator has three 2.5\" oval duct hose adapters for the vents, and two 2\" defrost outlets. The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables. This unit is setup to use cable controls, if you need vacuum please contact us. We do not offer electric controls. If you want to use the factory controls we can adapter your A\/C or non-A\/C  control panel to use this unit. We may need you to send us your control panel.  We offer a large variety of vents for these units. Please see the \u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003educt hose and vents\u003c\/a\u003e Page for all the different options. The evaporator has a three speed blower motor with a single fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit is to be mounted as it is pictured. In most cars the glove box does not have to be altered. The evaporator has approximately 275 CFM and 11000 BTU A\/C and 9000 BTU heat. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eFour rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eKnob style controls with a face plate\u003cbr\u003eHeater control valve w\/ cable\u003cbr\u003eThe evaporator unit measures: 18\" wide x 8.5\" deep x 8.5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts. in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104742175,"sku":"ID260","price":490.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/ID260.2.png?v=1761574000"},{"product_id":"id-255-heat-air-in-dash-evaporator-unit","title":"ID-255 Heat Air In-dash Evaporator Unit","description":"\u003cp\u003eA\/C and heat evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the \u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003educt hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the A\/C hoses will be on the passenger side of the unit, the heater hoses will be on the drivers side when it is installed. The unit can be mounted flat or at a 45 degree angle. The unit cannot have the hose adapters pointing straight up. The evaporator has approximately 290CFM and 14000 A\/C BTU and 12000 BTU heat . The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eFour rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eFour vents of your choice.\u003cbr\u003eKnob style controls with a face plate\u003cbr\u003eHeater control valve w\/ cable\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic A\/C Parts in the U.S.A.\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104840479,"sku":"ID255HC","price":346.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-id255.jpg?v=1753725568"},{"product_id":"id-250-in-dash-evaporator-unit-air-only","title":"ID-250 In-Dash Evaporator Unit Air Only","description":"\u003cp\u003eA\/C evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the \u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003educt hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit can be mounted flat or at a 45 degree angle. The unit cannot have the hose adapters pointing straight up. The evaporator has approximately 290CFM and 16000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cdiv data-appearance=\"default\" data-content-type=\"html\" data-element=\"main\"\u003e\n\u003cp style=\"text-align: center;\"\u003eA\/C evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the \u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003educt hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit can be mounted flat or at a 45 degree angle. The unit cannot have the hose adapters pointing straight up. The evaporator has approximately 290CFM and 16000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eFour vents of your choice.\u003cbr\u003eKnob style controls with a face plate\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts. in the U.S.A.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp style=\"text-align: center;\"\u003eA\/C evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the \u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003educt hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The unit can be mounted flat or at a 45 degree angle. The unit cannot have the hose adapters pointing straight up. The evaporator has approximately 290CFM and 16000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eFour vents of your choice.\u003cbr\u003eKnob style controls with a face plate\u003cbr\u003eThe evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts. in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938104971551,"sku":"ID250","price":323.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-id250_2.jpg?v=1753725567"},{"product_id":"id-200-in-dash-evaporator-unit","title":"ID-200 In-dash Evaporator Unit","description":"\u003cp\u003eA\/C only evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the\u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003e duct hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The picture shows how the unit mounts in the vehicle, the blower at the top, the drains at the bottom. The evaporator has approximately 290 CFM and 16000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe evaporator unit includes:\u003c\/p\u003e\n\u003cp\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eFour vents of your choice.\u003cbr\u003eKnob style controls with a face plate\u003cbr\u003eThe evaporator unit measures: 16\" wide x 6.5\" deep x 9.5\" tall.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":51698076483871,"sku":"ID200","price":476.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-id200_1.jpg?v=1753725565"},{"product_id":"1-2-inch-evaporator-drain-tube","title":"1\/2 Inch Evaporator Drain Tube","description":"\u003cp\u003eDrain tube for aftermarket evaporator units. The hose is black 1\/2\" ID drain tube. The tube is sold in one foot increments. This tubing is made to drain the water from the evaporator unit, this tubing is not for hot water, or hot vapor.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938140098847,"sku":"77-9402","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-77-9402_1.jpg?v=1753725466"},{"product_id":"3-8-inch-evaporator-drain-tube","title":"3\/8 Inch Evaporator Drain Tube","description":"\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938140164383,"sku":"77-9401","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-77-9401_1.jpg?v=1753725466"},{"product_id":"1-2-evaporator-drain-straight-out","title":"1\/2\" Evaporator Drain Straight Out","description":"\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938153074975,"sku":"5091","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-5091_1.jpg?v=1753725404"},{"product_id":"1-2-evaporator-drain-90-degree","title":"1\/2\" Evaporator Drain 90 Degree","description":"\u003cp\u003e1\/2\" drain outlet that points away from the evaporator at a 90 degree angle. It can be used with most aftermarket evaporator units. The drain is made of ABS plastic and is designed to be glued into the evaporator box, any five minute epoxy will do the job. The outlet requires a 1\/2\" hole for mounting purposes, and uses 1\/2\" drain tube.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938153206047,"sku":"5090","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-5090_1.jpg?v=1753725404"},{"product_id":"1-2-drain-tube-elbow","title":"1\/2\" Drain Tube Elbow","description":"\u003cp\u003eABS plastic drain elbow for 1\/2\" drain hose used on aftermarket air conditioning systems.\u003cbr\u003e1\/2\" OD\u003cbr\u003e3\/8\" ID\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938153271583,"sku":"5088","price":1.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-5088_1.jpg?v=1753725404"},{"product_id":"3-8-plastic-drain-hose-tee","title":"3\/8\" Plastic Drain Hose Tee","description":"","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938153337119,"sku":"5087","price":1.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-5087_1.jpg?v=1753725403"},{"product_id":"1-2-plastic-drain-hose-tee","title":"1\/2\" Plastic Drain Hose Tee","description":"","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938153402655,"sku":"5086","price":1.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-5086_1.jpg?v=1753725403"},{"product_id":"ud-195-sub-compact-a-c-only-evaporator","title":"UD-195 Sub Compact A\/C Only Evaporator","description":"\u003cp\u003eSlim compact A\/C only evaporator unit with remote controls. This evaporator is designed to mount under the dash board while blowing air in four different directions. The unit has four vents on the face with a chrome outline, each vent is directional for driver and passenger comfort. The evaporator has a two switch control panel that can be mounted under the dash or in the dash (as shown in picture). If you would like additional vents, one being part of the control pod, please select the UD-370 Control Pod listed below by clicking the box next to it..The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 14000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 21-1\/2\" wide across the face x 11-\/1\/2\" deep x 5\" tall x 16\" wide at back of unit. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003ca href=\"#learnmore\"\u003eLearn More\u003c\/a\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e\u003cspan style=\"font-size: medium; color: #000000;\"\u003e\u003cstrong\u003e\u003ca id=\"learnmore\"\u003e\u003cspan style=\"color: #000000;\"\u003eThe evaporator unit includes:\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eIf you would like to add this unit to a complete kit please go to the complete kits page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A. If you are interested in having this evaporator with heat and cool please contact us for pricing.\u003c\/p\u003e\u003cbr\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938162118943,"sku":"UD-195","price":300.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud195_1_1.jpg?v=1753725369"},{"product_id":"id-200hc-in-dash-evaporator-unit","title":"ID-200HC In-dash Evaporator Unit","description":"\u003cp\u003eA\/C and Heat evaporator unit designed to mount behind the dash board. The evaporator has four round duct hose adapters, which use 2.5\" flexible duct hose. The controls and the vent louvers can be mounted in the dash or under the dash. We offer a large variety of vents for these units. Please see the\u003ca href=\"https:\/\/nostalgicac.com\/duct-hose-vents.html\"\u003e duct hose and vents\u003c\/a\u003e Page for all the different options, if you would like to add defrost see the defrost Y's. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The picture shows how the unit mounts in the vehicle, the blower at the top, the drains at the bottom. The evaporator has approximately 290 CFM and 14000 BTU of AC and 12000 BTU of Heat. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eFour rubber grommets\u003cbr\u003eEight feet of 2.5\" duct hose\u003cbr\u003eFour vents of your choice.\u003cbr\u003eKnob style controls with a face plate \u003cbr\u003eCable operated heater control with a cable\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe evaporator unit measures: 16\" wide x 6.5\" deep x 9.5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938163724575,"sku":"ID200HC","price":508.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-id200new_front_1.jpg?v=1753725363"},{"product_id":"ud-190-1964-1967-ford-mustang-falcon-evaporator-unit-with-brushed-stainless-face","title":"UD-190 1964 - 1967 Ford Mustang Falcon Evaporator Unit with Brushed Stainless Face","description":"\u003cp\u003e1964-1967 Ford Falcon Mustang replica with Brushed Stainless Steel Face. Under-Dash unit replicates the original evaporator in old Fords. This Unit has a Brushed Stainless Steel Face and comes with Dual Vane Chrome Vents. If you prefer a different look, please check the pictures to find one that you would like and choose from the options below. Unit is ready to install with your existing system or can be added with a new system. The evaporator has approximately 290 CFM and 15000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cp\u003e1964-1967 Ford Falcon Mustang replica. Under-Dash unit replicates the original evaporator in old Fords. This Unit has a Brushed Stainless Steel Face and comes with Dual Vane Chrome Vents. If you prefer a different look, please check the pictures to find one that you would like and choose from the options below. Unit is ready to install with your existing system or can be added with a new system.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThis A\/C only evaporator unit is designed to mount under the dash board. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator unit has passenger side hose outlets, the fittings for the hoses will be on the passenger side of the unit when it is installed. The evaporator has approximately 290 CFM and 15000 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants. The evaporator unit measures: 16\" wide x 13\" deep x 5\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003c\/p\u003e\u003cp\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured by Nostalgic AC Parts in the U.S.A.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Dual Vane Vents Stainless Face (Default) \/ Yes","offer_id":50938166313247,"sku":"UD-190SS-01","price":417.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Stainless Face (Default) \/ No","offer_id":50938166346015,"sku":"UD-190SS-02","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Stainless Face \/ Yes","offer_id":50938166378783,"sku":"UD-190SS-03","price":417.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Stainless Face \/ No","offer_id":50938166411551,"sku":"UD-190SS-04","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Stainless Face \/ Yes","offer_id":50938166444319,"sku":"UD-190SS-05","price":417.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Stainless Face \/ No","offer_id":50938166477087,"sku":"UD-190SS-06","price":367.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Black Face \/ Yes","offer_id":50938166509855,"sku":"UD-190SS-07","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Dual Vane Vents Black Face \/ No","offer_id":50938166542623,"sku":"UD-190SS-08","price":342.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Black Face \/ Yes","offer_id":50938166575391,"sku":"UD-190SS-09","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Single Vane Vents Black Face \/ No","offer_id":50938166608159,"sku":"UD-190SS-10","price":342.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Black Face \/ Yes","offer_id":50938166640927,"sku":"UD-190SS-11","price":392.99,"currency_code":"USD","in_stock":true},{"title":"Tri Vane Vents Black Face \/ No","offer_id":50938166673695,"sku":"UD-190SS-12","price":342.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ud190ss_1_1.jpg?v=1753725354"},{"product_id":"ud-520-24v-big-truck-floor-mount-evaporator-unit","title":"UD-520 24V Big Truck Floor Mount Evaporator Unit","description":"\u003cp\u003e24V Floor Mount A\/C only evaporator with four round vents surrounded by Steel case for durability. Designed to sit between the seats, or the floor in the rear of a vehicle. The evaporator has four round louvers that can be pointed in all directions or closed off completely. The controls are located on the center of the unit. The evaporator has a three speed blower motor with a dual fan setup. The evaporator has approximately 260 CFM and 17,180 BTU. The evaporator unit is compatible with R-134a and R-12 refrigerants.\u003cbr\u003eThe evaporator unit includes:\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube\u003cbr\u003eO-rings\u003cbr\u003eTwo rubber grommets\u003cbr\u003e\u003cbr\u003eThe evaporator unit measures: 12.8\" wide x 8.3\" deep x 20\" tall. \u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e\u003cbr\u003eIf you would like to add this unit to a complete kit please go to the complete kits Page and select the make of your vehicle. In that selection we offer complete kits with \"select an evaporator\" option. Add this evaporator to your shopping cart, and select the kit for your make, add it to the cart and follow the directions for checkout.\u003cbr\u003eThis evaporator unit is manufactured in the U.S.A.\u003c\/p\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eThis Evaporator does not have vents for floor heat\u003c\/strong\u003e.\u003c\/span\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":50938185580831,"sku":"UD-520-24V","price":802.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-ck-1025_2_2.jpg?v=1753725254"},{"product_id":"id-260sc-in-dash-ac-heat-and-defrost-unit-with-floor-vent","title":"ID-260SC In-Dash AC Heat and Defrost Unit with Floor Vent","description":"\u003cp\u003eIn-Dash Evaporator with A\/C, Heat, and Defrost as well as a Floor Vent. This Evaporator unit is designed to mount behind the dash board. The evaporator has three 2.5\" oval duct hose adapters for the vents, and a single 2.5\" outlet for the defrost. The controls and the vent louvers can be mounted in the dash or under the dash, or you can use your factory controls and cables (Pick from option below. You must send Controls to our Facility to get modified).\u003cbr\u003e\u003cbr\u003eUnit output is 300CFM with 11000BTU of AC and 9000 BTU of Heat. You can use either R-134a or R-12 refrigerant with this unit.  Unit comes with everything pictured.\u003cbr\u003e\u003cbr\u003eUnit Dimensions are 18.5\" wide, 9\" deep and 9.5\" tall.\u003c\/p\u003e\n\u003cp\u003eThe evaporator unit includes:\u003cbr\u003e\u003cbr\u003eThree speed blower motor\u003cbr\u003eAdjustable temperature thermostat\u003cbr\u003eEvaporator unit mounting hardware\u003cbr\u003eExpansion valve\u003cbr\u003eDrain tube \u0026amp; cork tape for hose fittings\u003cbr\u003eO-rings\u003cbr\u003eFour rubber grommets\u003cbr\u003eTen feet of 2.5\" duct hose\u003cbr\u003eKnob style controls with Under Dash Pod\u003cbr\u003eHeater control valve w\/ cable\u003cbr\u003eThe evaporator unit measures: 18\" wide x 9\"deep x 9.5\" tall\u003cspan style=\"font-size: small;\"\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis Evaporator is made at our facility in Ocala Florida USA and is covered by a one year parts warranty from purchase date.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Underdash Controls (Default)","offer_id":50938203701535,"sku":"ID260SC-01","price":548.61,"currency_code":"USD","in_stock":true},{"title":"In Dash Controls","offer_id":50938203734303,"sku":"ID260SC-02","price":548.61,"currency_code":"USD","in_stock":true},{"title":"Use Factory Controls (Must send Controls to our Facility)","offer_id":50938203767071,"sku":"ID260SC-03","price":583.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/files\/products-in-dash-evaporator-id260sc_1.jpg?v=1753725214"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0921\/1651\/7151\/collections\/cropped-cropped-Nostalgic-AC-Parts_2800c164-cc0d-4c58-ba16-c3d5f4ea1035.png?v=1749474888","url":"https:\/\/www.nostalgicac.com\/collections\/evaporator-units.oembed","provider":"Nostalgic AC Parts","version":"1.0","type":"link"}